Cart Item Removed. Undo
  • No products in the cart.

Epoxy Comic Book Tabletop

April 6, 2018

We have received lots of phone calls from people wanting to use old comic books and epoxy to make comic tabletops, bar tops, and floors. Wherever the installation, the basic steps are the same. In this post, I’ll show you how to make a small tabletop decorated with comics and epoxy. Materials needed: Wood tabletop […]

The Bloopers Blog

March 1, 2018

I’ve done a lot of projects in the last 7 years I’ve worked here. Which means I’ve messed up a lot of times as well. In this blog post, I’ll go over some mistakes I’ve made and how you can avoid them. General Bloopers: The most common problem I had when I first started was […]

Concrete Stamp Made from Urethane Rubber

February 14, 2018

Urethane rubber has many uses because of its strength, durability, and flexibility. It is often used to pot or encapsulate underwater electronics, make shoe insoles, make molds for concrete bricks, blocks, and statues. It also makes an excellent stamp for concrete, where it is pressed into fresh, wet concrete to create a pattern. In this […]

Polyester Resin Vs. Epoxy Resin

January 24, 2018

 Epoxy resin makes a strong and durable tabletop. We frequently get asked about the difference between epoxy resin and polyester resin. Often, people say “resin” without specifying which resin. It all depends on what your project is as to whether you would choose epoxy resin or polyester resin. Here’s a quick breakdown on the differences […]

Epoxy and Wood Star Holiday Decoration

January 8, 2018

Epoxy can help make wooden decorations last a long time. For this project, I will be painting and decorating a large plain wooden star that I found at a local craft store and then sealing it with epoxy. This application process can be used with any size and shape wood decoration. Make sure to use […]

Silicone Glove Mold and Fiberglass Mothermold

November 14, 2017

With larger pieces, it is more cost effective to make a glove mold rather than a large block mold. A glove mold is also less cumbersome than a large block mold. Glove molds do need a supportive structure since they are thinner than a block mold, so I will make an epoxy and fiberglass mothermold […]

Latex Storage and Winter Weather

October 30, 2017

Latex is a great mold making material that makes durable, long lasting molds for concrete, plaster, hydrocal and other non-exothermic casting materials. Finished latex molds have a long library life when properly stored as well. Howeve,r winter is coming and that can mean issues with shipping and storing uncured latex. Our AeroMarine Products Mold Making […]

Penny Tabletop with Epoxy

September 7, 2017

For this project, we are taking an old side table and refinishing it with pennies and epoxy. Penny epoxy counter tops, table tops, and floors are a popular project that we get asked about frequently. This post will walk you through doing a penny epoxy table top over wood. If you have any questions about […]

Silicone Mold to Modify a Fragile or Broken Original Part (Post 2 of 2)

July 12, 2017

This is a continuation of our last post about using silicone molds to modify a broken or fragile original part. In this post, we will go over sculpting in clay on the new piece and making a new mold. You can read the first part of this blog post here: https://www.aeromarineproducts.com/silicone-molds-to-modify-a-fragile-original-part/ Materials needed: AeroMarine Products AM128 […]

Silicone Mold to Modify a Fragile or Broken Original Part (Post 1 of 2)

June 8, 2017

Sometimes, I have an original part that is either broken or that I want to modify in different ways. In this 2 part blog post, I am going to make several slightly different variations of this part. However, the original is a bit fragile. I don’t want to damage it by sculpting clay on it […]

« Previous PageNext Page »

Cart Item Removed. Undo
  • No products in the cart.