Make a Silicone Mold of Almost Anything!December 13, 2019 https://www.aeromarineproducts.com/product/am-128-rtv-silicone-rubber-1-gallon-kit/ Yes, that’s right. You can make a silicone mold of almost anything! Some things require specific preparation and there are a few things you might not want to use. Otherwise, the mold making possibilities with AeroMarine Products silicone rubber are endless. Let’s start with materials that you don’t want to use to make a […]
Mr. Quentin Berryhill, Colle and Kreamy WaxJuly 3, 2018 Air Jordan 1 candle set Mr. Quentin Berryhill, founder and owner of Colle and Kreamy Wax, makes a lot of amazing art and skate wax. However, lately he’s been focus on producing beautiful and original soaps and candles. Mr. Berryhill attended Cal State Northridge where he took a sculpting class as an elective that sparked […]
Mold Makers! 5 Reasons Why to Buy Mold Making Materials from AeroMarine ProductsMay 11, 2018Molds & castings made with AeroMarine Products silicone RTV mold making rubber and urethane casting resin Hey Mold Makers! So sorry that A-R Products is gone. Come to AeroMarine Products now. Join our knowledgeable, super creative family! Here are 5 reasons why to buy your silicone RTV rubber mold making materials and urethane casting resins […]
The Bloopers BlogMarch 1, 2018I’ve done a lot of projects in the last 7 years I’ve worked here. Which means I’ve messed up a lot of times as well. In this blog post, I’ll go over some mistakes I’ve made and how you can avoid them. General Bloopers: The most common problem I had when I first started was […]
Silicone Mold to Modify a Fragile or Broken Original Part (Post 2 of 2)July 12, 2017This is a continuation of our last post about using silicone molds to modify a broken or fragile original part. In this post, we will go over sculpting in clay on the new piece and making a new mold. You can read the first part of this blog post here: https://www.aeromarineproducts.com/silicone-molds-to-modify-a-fragile-original-part/ Materials needed: AeroMarine Products AM128 […]
Silicone Mold to Modify a Fragile or Broken Original Part (Post 1 of 2)June 8, 2017Sometimes, I have an original part that is either broken or that I want to modify in different ways. In this 2 part blog post, I am going to make several slightly different variations of this part. However, the original is a bit fragile. I don’t want to damage it by sculpting clay on it […]
Roto Casting Resin in a Two Part Silicone MoldMay 12, 2017Rotational or roto casting means rotating your mold continually while the resin sets up so that youget a hollow casting. Two of the most common reasons to cast this way are to keep the weight of the piece down and to save money on casting materials. For this post, I’m doing the roto casting by […]
