Starting From $56.00
AeroMarine Products Polymer Urethane Black Super Fast Casting Resin is a very fast setting, 1:1 mix low odor, ” almost water thin” system. Our Urethane Balck Casting Resin is great for casting decorative figurines, picture frames, and industrial parts. It has a 1 minute work life, so you make certain that you have your mold ready before you begin pouring and mixing the Black Casting Resin. With a 15 to 30 minute demold time, you can make rapid prototypes or production runs. It has a 1:1 mix ratio by volume
AeroMarine Polymer Urethane Black Super Fast Casting Resin is a deep black color. It sets to a hard polymer form and is very tough and impact resistant. Our Black Casting Resin somewhat resembles PVC pipe when cured. Shrinkage is usually unmeasurable. We sell an aerosol urethane mold release for use with this casting resin.
NOTE: Make sure that the casting resin, tools, containers and ambient temperature are all at 70F before you begin pouring and mixing the casting resin. If you do not have everything at 70F, the casting resin will take much longer to cure. Also, at temperatures higher than 72F, the casting resin will cure faster.
- Shore Hardness: 75D-80D
- Tensile Strength: 5840psi
- Mixed viscosity: 100cps (nearly water-thin)
- Mix Ratio: 1:1 by volume
- Color: Black
- Work Life: 1 minute at 70F
- Demold Time: 15-30 minutes