Silicone Rubber Putty
Kneadable, moldable

Latex Mold Making Rubber- Buy online, same day shipping.aeroMarine Products now accepts Master Card and PayPal for all Latex Rubber Purchases

Phone orders welcome!
1(877)342-8860

AeroMarine Products, Inc.
8659 Production Avenue
San Diego, CA 92121

AeroMarine Silicone Rubber Putty

Silicone Rubber Putty

AeroMarine QuickMold Green Silicone Putty

AeroMarine QuickMold Silicone Putty is a fast setting, 1:1 mix silicone RTV putty designed for making rapid mold of many types of objects.  This includes figurines, horse's hooves, industrial parts, models, etc.

Advantages:

  • Fast curing- molds can be used in 15 minutes
  • Soft paste consistency picks up fine detail

Specifications:

Mixed viscosity:            Soft paste
Color:                           Green
Work life:                      5 minutes @70F
Cure time:                    10-15 minutes @70F
Durometer, Shore A:    40

 

AeroMarine Silicone Rubber Putty

Fast setting, one to one mix, silicone RTV rubber putty

Used to make rapid molds.

Safe to use on skin.

Each pound yields 21 cubic inches.

 silicone rubber putty
1 pound kit - consists of 8 ounces each of Part A and Part B $33

Ships Immediately

8 pound kit - consists of 4 pounds each of Part A and Part B $201

Ships Immediately

100 pound kit - consists of 50 pounds each Part A and Part B $1450

Ships in three days

How to make a mold with silicone RTV rubber putty
These photos demonstrate a method of making a quick mold of a shell found on the beach.  This mold cost less than $2 to make and it was completed in about 5 minutes.

The first two photos show measuring and mixing equal amounts of moldmaking rubber.

The third photo shows "smooshing" the silicone onto the original shell. In the fourth photo the mixed casing resin is being poured into the mold.

In the fifth photo the finished casting is being demolded. It is made of AeroMarine Casting Resin, and cost about $.05 on materials. It could also have been made of soap, wax, chocolate, candy, or even a low melt metal.
Measuring how much AeroMarine putty is needed before beginning Kneading the AeroMarine putty
(1) Measuring the silicone rubber putty before mixing.

 (2) Kneading the silicone rubber putty.
Shell Smooshing sample with AeroMarine Products Sample of Pouring CR into Shell witih AeroMarine Products
(4) Pouring the mixed casting resin into the mold.

Demolding the finished part. In this case it is AeroMarine casting resin, but it could easily have soap, wax, chocolate, candy,or even low melt metals.

(3) 'Smooshing' the putty over the shell.

(5) Demolding the finished part. In this case it is AeroMarine casting resin, but it could easily have soap, wax, chocolate, candy,or even low melt metals.

 

© 2010 AeroMarine Products │ Policies | Samples

Website designed by San Diego Web Design